Share this:
Cream-paste for screen printing glass
matting IVSATIN-silk screened pro
matting IVSATIN-silk screened pro
Specification:
IVSATIN Etching Cream is a paste used for matting and etching glass through silkscreen printing. It is designed for artistic or large-scale printing of glass or mirrors, using the serial process. This product is the best in the IVSATIN range. It must be used in conjunction with Diluent IVSATIN, which is a diluent specifically formulated to adjust the viscosity of the Etching Cream for different production needs without compromising its etching properties.
One kilogram costs $90, and one set includes 4 kilograms of Etching Cream IVSATIN and 1 liter of Diluent. The total cost of the set is $450.
To order, fill out the form in the "contacts" section.
Attention! The recipe and production technology for the paste and thinner for screen-printed glass matting are for sale. Please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.
Glass frosting via screen printing: an industrial revolution in mass production
The "IVSATIN-silk screened pro" product line represents the pinnacle of technology in the field of mass glass processing. Our professional chemical etching cream transforms a complex, hazardous chemical process into a standard, fast, and predictable screen printing operation. The advanced chemical formula of IVSATIN acts as a highly effective, stress-free alternative to industrial sandblasting. It permanently alters the glass surface without complex dust-generating machinery or micro-structural material stress, ensuring the glass retains its mechanical strength.
By implementing IVSATIN technology, glass processing plants, mirror factories, and furniture manufacturers can replicate designs, logos, scales, and geometric patterns with millimeter precision, as well as perform solid satin finishing (producing frosted privacy glass) on large-format sheets and mirrors. The result is a perfectly smooth, permanent, premium-quality frosted surface (Satin effect) free of any defects, which cannot be scratched or washed off.
Industrial-Grade Efficiency vs. Retail Solutions
Many commercial glass workshops initially try using consumer-grade products like Armour Etch cream for small jobs. However, for industrial volume and screen printing, retail formulas fail. Unlike hobby-focused Armour Etch, IVSATIN-silk screened pro is specifically engineered for high-mesh screens. It delivers a 10x faster reaction time (from 30 seconds) and eliminates the patchy, uneven look common when applying Armour Etch glass etching cream over large surface areas.
Technological advantages for Chief Engineers and Production Technologists:
Perfect surface quality. Unlike sandblasting, which leaves the glass porous and prone to deep dirt accumulation, IVSATIN cream alters the glass structure at the molecular level. The surface resists fingerprints, oils, and acids, and requires no protective lacquer coating. The result is a perfectly uniform, premium frosted finish (Satin effect) that is chemically bonded to the material. It is completely indelible, cannot be scratched off, and resists industrial cleaning agents, fingerprints, and environmental exposure.
Eco-friendly and Safe (Zero VOC): The cream formula is completely stable and non-volatile. It releases no hazardous fumes into the workspace air during printing. This eliminates the need to design expensive isolated chemical zones and lowers the requirements for workshop ventilation systems.
Ultra-high pattern detail: The sandblasting method through a film distorts the edges of fine elements. Screen printing with our cream allows for the reproduction of ultra-thin lines (from 0.1 mm), halftone screens, gradients, and complex geometric patterns that are unattainable by mechanical methods.
| No Initial Capital Requirements (Zero Capex)
You do not need to purchase expensive, bulky equipment or build acid etching lines. IVSATIN technology only requires purchasing the consumable material — the cream itself. |
Speed and simplicity of printing
The formulation is applied in exactly the same way as standard screen printing ink. However, while foreign alternatives require minutes, the IVSATIN formula activates instantly — a dense, rich satin finish forms in just 30 seconds or more with a layer thickness of tenths of a millimeter! |
| Fantastic savings (minimal consumption)
Thanks to its unique formulation, IVSATIN consumption is kept to an absolute minimum. With a fine-tuned process, 1 kg of cream covers 30–45 m² of artistic patterns or 15.5 m² of solid frosting. This outperforms any European analogues. |
Absolute production flexibility
You are completely free from the constraints of heavy machinery. Line retooling can be done in real time: you can seamlessly transition from single custom orders to multi-thousand industrial production runs. |
Technical parameters & supported materials
* Supported surfaces: Engineered for flawless, permanent results across multiple industrial materials including architectural glass, mirrors, commercial ceramics, porcelain, and natural stone (marble, slate, granite).
* Tooling requirements: Engineered for standard polyurethane squeegees with a hardness rating of 60/65 Shore, operated at an approximate 23° tilt angle for consistent chemical distribution.
* Mesh count compatibility: Optimized for standard screen printing meshes ranging from 40 to 120 mesh.
* Definition & layer density: Guarantees perfectly sharp design edges without bleeding or halos, at a layer thickness of just tenths of a millimeter.
* High-yield reusability: The stable formula allows operators to scrape excess paste off the mesh back into the container for multi-cycle reuse, maximizing production cost efficiency.
* Tooling requirements: Engineered for standard polyurethane squeegees with a hardness rating of 60/65 Shore, operated at an approximate 23° tilt angle for consistent chemical distribution.
* Mesh count compatibility: Optimized for standard screen printing meshes ranging from 40 to 120 mesh.
* Definition & layer density: Guarantees perfectly sharp design edges without bleeding or halos, at a layer thickness of just tenths of a millimeter.
* High-yield reusability: The stable formula allows operators to scrape excess paste off the mesh back into the container for multi-cycle reuse, maximizing production cost efficiency.
Quick Printing Guide
1. Preparation: Mix IVSATIN-silk screened pro cream and Diluent IVSATIN until you reach the optimal viscosity for your specific polyester screen count.
2. Printing process: Print on the air side of the glass using a standard rubber squeegee (60/65 Shore hardness) tilted at approximately 23° with slow, consistent passes.
3. Etching & Washing: The formulation reacts from 30 seconds for thick layer applications, up to 2 minutes when printing through a fine mesh screen (allowing the paste to fully dry is recommended to achieve maximum satin density). Wash the glass thoroughly with pressurized water and clean the screen mesh immediately.
2. Printing process: Print on the air side of the glass using a standard rubber squeegee (60/65 Shore hardness) tilted at approximately 23° with slow, consistent passes.
3. Etching & Washing: The formulation reacts from 30 seconds for thick layer applications, up to 2 minutes when printing through a fine mesh screen (allowing the paste to fully dry is recommended to achieve maximum satin density). Wash the glass thoroughly with pressurized water and clean the screen mesh immediately.
What is required to launch screen printing frosting at your plant?
A minimal kit to integrate the technology into your production cycle:
* IVSATIN-silk screened pro cream + mandatory Diluent IVSATIN (to calibrate viscosity for your mesh counts).
* Standard printing mesh and a squeegee for precise transfer of the formulation onto the glass.
* Semiautomatic printing press and an industrial washing machine (required solely for automating high-volume continuous runs).
* Working conditions: a dry room with air and glass temperatures not lower than 25°C (77°F).
* Standard printing mesh and a squeegee for precise transfer of the formulation onto the glass.
* Semiautomatic printing press and an industrial washing machine (required solely for automating high-volume continuous runs).
* Working conditions: a dry room with air and glass temperatures not lower than 25°C (77°F).
Storage and safety specifications
* Unlimited shelf-life. The product has an unlimited shelf life in tightly closed containers and does not spoil during long-term storage. If crystallization occurs over time, simply mix the formulation thoroughly before use to restore its original smooth consistency.
* Eco-friendly & Safe (Zero VOC). The cream formula is completely stable and non-volatile. It releases no hazardous fumes into the workspace air during printing, eliminating the need for expensive isolated chemical zones or complex ventilation systems.
* Active safety. This product is for professional industrial use only. Standard personal protective equipment (protective gloves and safety goggles) is required during the printing and glass washing phases.
* Documentation. Please refer to the supplied Safety Data Sheet (SDS) for comprehensive handling, storage, and disposal procedures.
Frequently Asked Questions
Can I use Armour Etch for industrial screen printing on glass?
No. Armour Etch is a hobby-grade product designed strictly for manual DIY crafting and individual stencils. It is physically impossible to use for professional screen printing. Consumer formulas like Armour Etch cream have a loose, jelly-like consistency that lacks the controlled viscosity required for a printing press. When pushed through a mesh, it bleeds instantly, and once the screen is lifted, the jelly runs together into a blurry mess. IVSATIN pro belongs to a completely different product class—it is an industrial chemical compound engineered with a stable, high-definition viscosity that holds fine lines down to 0.1 mm without bleeding.
No. Armour Etch is a hobby-grade product designed strictly for manual DIY crafting and individual stencils. It is physically impossible to use for professional screen printing. Consumer formulas like Armour Etch cream have a loose, jelly-like consistency that lacks the controlled viscosity required for a printing press. When pushed through a mesh, it bleeds instantly, and once the screen is lifted, the jelly runs together into a blurry mess. IVSATIN pro belongs to a completely different product class—it is an industrial chemical compound engineered with a stable, high-definition viscosity that holds fine lines down to 0.1 mm without bleeding.
Why shouldn't commercial glass factories buy bulk Armour Etch?
Commercial operations require industrial-grade chemical efficiency, not scaled-up retail products. Bulk Armour Etch is still a retail formula packed into a larger container; it cannot provide the repeatable, defect-free satin surface needed for large-format mirror manufacturing or architectural glass sheets. IVSATIN-silk screened pro is engineered from the ground up for serial production lines. It ensures ultra-low consumption (1 kg covers up to 30–45 m² of fine patterns) and eliminates structural micro-stress common with sandblasting, making it the standard choice for B2B glass processing plants.
Commercial operations require industrial-grade chemical efficiency, not scaled-up retail products. Bulk Armour Etch is still a retail formula packed into a larger container; it cannot provide the repeatable, defect-free satin surface needed for large-format mirror manufacturing or architectural glass sheets. IVSATIN-silk screened pro is engineered from the ground up for serial production lines. It ensures ultra-low consumption (1 kg covers up to 30–45 m² of fine patterns) and eliminates structural micro-stress common with sandblasting, making it the standard choice for B2B glass processing plants.
Photo
Video
